SKU: PE - 110 Category: Tag:


The ESP32 chip comes with 38 pins with multiple functions. Not all pins are exposed in all ESP32 development boards, and there are some pins that cannot be used.

The advancement board prepares the ESP-WROOM-32 module containing Tensilica Xtensa? Dual-Core 32-cycle LX6 microchip. This processor is like the ESP8266 yet has two CPU centers (can be independently controlled), works at 80 to 240 MHz flexible clock recurrence and performs at up to 600 DMIPS (Dhrystone Million Instructions Per Second).



Xtensa? Dual-Core 32-cycle LX6

Upto 240MHz Clock Freq.

520kB inner SRAM

4MB outer glimmer

802.11b/g/n Wi-Fi handset

Bluetooth 4.2/BLE

There’s additionally 448 KB of ROM, 520 KB of SRAM and 4MB of Flash memory (for program and information stockpiling) barely to adapt to the huge strings that make up website pages, JSON/XML information, and all that we toss at IoT gadgets these days.


The ESP32 Integrates 802.11b/g/n HT40 Wi-Fi handset, so it can not just interface with a WiFi arrange and associate with the Internet, yet it can likewise set up an organization, permitting different gadgets to interface straightforwardly to it. The ESP32 underpins WiFi Direct too, which is a decent choice for distributed association without the need of a passageway. The WiFi Direct is simpler to arrangement and the information move speeds are obviously superior to Bluetooth.


The chip likewise has double mode Bluetooth capacities, which means it underpins both Bluetooth 4.0 (BLE/Bluetooth Smart) and Bluetooth Classic (BT), making it considerably more adaptable.


As the working voltage scope of ESP32 is 2.2V to 3.6V, the board accompanies a LDO voltage controller to keep the voltage consistent at 3.3V. It can dependably supply up to 600mA, which should be a sizable amount of when ESP32 pulls as much as 250mA during RF transmissions. The yield of the controller is additionally broken out to one of the sides of the board and marked as 3V3. This pin can be utilized to supply capacity to outer parts.


Capacity to the ESP32 advancement board is provided by means of the on-board MicroB USB connector. Then again, on the off chance that you have a managed 5V voltage source, the VIN pin can be utilized to straightforwardly supply the ESP32 and its peripherals.


Likewise the rest current of the ESP32 chip is under 5 ?A, making it appropriate for battery controlled and wearable gadgets applications.


The ESP32 is plan for low force IoT applications as a main priority. It’s high preparing power with in-constructed Wi-Fi/Bluetooth and Deep Sleep Operating abilities makes it ideal for most Portable IoT gadgets. Additionally now, since


The local stage to program ESP32 is the ESP-IDF, yet most fledglings use Arduino IDE since it is anything but difficult to utilize. In the event that you need to work with the local stage you check the official Starter direct from Espressif itself.


In the event that you are utilizing the Arduino IDE, it will barely require 5-10 minutes to transfer you first program to ESP32. All you require the Arduino IDE a USB link and ESP32 board itself. You can check this Arduino ESP32 manual for set up your Arduino for ESP32.


Once arduino IDE is introduced on the PC, associate the board with PC utilizing USB link. Presently open the arduino IDE and pick the right board by choosing Tools>Boards>ESP32 Dev unit, and pick the right Port by choosing Tools>Port. To kick it off with ESP32 board and flicker the underlying LED, load the model code by choosing Files>Examples>Basics>Blink. When the model code (additionally demonstrated as follows) is stacked into your IDE, click on the ‘transfer’ button given on the top bar. Once the transfer is done, you should see the ESP32’s underlying LED squinting. The following is the model code for squinting:

int LED_BUILTIN = 2;

void setup() {



void loop() {

digitalWrite(LED_BUILTIN, HIGH);


digitalWrite(LED_BUILTIN, LOW);




Customer Reviews

There are no reviews yet.

Be the first to review “NODE MCU- ESP32 – 38 PIN”

Your email address will not be published. Required fields are marked *