Description
The?2.4 inch TFT touch Screen LCD?Module For?Arduino?is a beautiful large touchscreen?display shield with built in micro SD card connection.
Zest up your Arduino venture with a wonderful huge touchscreen show shield with worked in microSD card association
This TFT show is large (2.4 and slanting) splendid (4 white-LED backdrop illumination) and vivid (18-piece 262,000 unique shades)
240?320 pixels with singular pixel control
It has far more goal than a highly contrasting 128?64 presentation
As a little something extra, this showcase has a resistive touch screen appended to it as of now, so you can distinguish finger presses anyplace on the screen
Inclining LCD TFT show
240?320 goal, 18-piece (262,000) shading
Works with any Arduino ‘328 or super (Leonardo not upheld yet)
5V compatible, use with 3.3V or 5V rationale.
REQUIREMENTS:
The arduino nano shield has autonomous force supply to give additional capacity to servo and different sensors.
- Presentation:
This an instructional exercise for fledglings about the TFT LCD contact screen shield mounted on an Arduino UNO board, where we utilize some essential showcase capacities and a little touch work, this with straightforward and definite capacities.
- Required Hardware
S.No. Item?? Quantity
- Arduino UNO 1
- 2.4? Touchscreen LCD 1
- Equipment Interfacing
The 2.4″ TFT LCD screen is an ideal Arduino Shield. You can straightforwardly push the LCD screen on top of the Arduino Uno and it will consummately coordinate with the pins and slid in through. Be that as it may, as issues of wellbeing cover the Programming terminal of your Arduino UNO with a little protection tape, in the event of some unforeseen issue if the terminal interacts with your TFT LCD screen. The LCD collected on UNO will look something like this underneath.
- Library File
Following library will be needed to run this sketch. Download the compress record remove the equivalent and duplicate this to your Arduino library organizer.
This library document should be set at the introduce organizer of Arduino. I have a 64 digit Win7 OS and my Arduino library organizer address is situated at
C:Program Files (x86)Arduinolibraries
1 Adafruit_GFX library
You may download library document from here.
2 Adafruit_TFTLCD library
You may download library document from here.
3 TouchScreen library
#include <Adafruit_GFX.h> ???// Core graphics library
#include <Adafruit_TFTLCD.h> // Hardware-specific library
#include <TouchScreen.h>
#define YP A3 ?// must be an analog pin, use “An” notation!
#define XM A2 ?// must be an analog pin, use “An” notation!
#define YM 9 ??// can be a digital pin
#define XP 8 ??// can be a digital pin
#define TS_MINX 140
#define TS_MINY 120
#define TS_MAXX 910
#define TS_MAXY 920
// For better pressure precision, we need to know the resistance
// between X+ and X- Use any multimeter to read it
// For the one we’re using, its 300 ohms across the X plate
TouchScreen ts = TouchScreen(XP, YP, XM, YM, 300);
#define LCD_CS A3
#define LCD_CD A2
#define LCD_WR A1
#define LCD_RD A0
#define LCD_RESET A4
Adafruit_TFTLCD tft(LCD_CS, LCD_CD, LCD_WR, LCD_RD, LCD_RESET);
int32_t answer = 0;
char keyarray1[2];
char keyarray2[2];
int32_t keyarray1i = 0;
int32_t keyarray2i = 0;
long Time = 0;
long millicount = 0;
int interval = 1000;
int screenTimout = 15;
// Assign human-readable names to some common 16-bit color values:
#define BLACK ??0x0000
int32_t BLUE = tft.color565(50, 50, 255);
#define DARKBLUE 0x0010
#define VIOLET 0x8888
#define RED ????0xF800
#define GREEN ??0x07E0
#define CYAN ???0x07FF
#define MAGENTA 0xF81F
#define YELLOW ?0xFFE0
#define WHITE ??0xFFFF
#define GREY ??tft.color565(64, 64, 64);
#define GOLD 0xFEA0
#define BROWN 0xA145
#define SILVER 0xC618
#define LIME 0x07E0
#define ORANGE 0xFD20
#define ORANGERED 0xFA20
#define minpressure 5
#define maxpressure 1000
void draw()
{
tft.fillScreen(WHITE);
tft.fillRoundRect(2, 7, 235, 70, 8, YELLOW);
tft.drawRoundRect(2, 7, 235, 70, 20, RED);
}
void drawintro()
{
tft.fillScreen(BLACK);
tft.fillScreen(RED);
tft.fillScreen(YELLOW);
tft.fillScreen(BLACK);
tft.setTextSize(3);
tft.drawRoundRect(10,0, 220, 319, 20, RED);
tft.setTextColor(BLUE);
tft.setCursor(30, 100);
tft.print(“Welcome To”);
tft.setCursor(30, 130);
tft.setTextColor(YELLOW);
tft.print(“ROBO INDIA”);
tft.setCursor(30, 160);
tft.setTextColor(RED);
tft.setTextColor(WHITE);
tft.print(” ?Touch here “);
tft.setCursor(30, 50);
tft.fillRoundRect(20, 40, 200, 40, 8, YELLOW);
tft.setTextColor(RED);
digitalWrite(13, HIGH);
TSPoint p = ts.getPoint(); ????// Read touchscreen
digitalWrite(13, LOW);
pinMode(XM, OUTPUT);
pinMode(YP, OUTPUT);
int i = 1;
while (i == 1)
{
digitalWrite(13, HIGH);
TSPoint p = ts.getPoint(); ????// Read touchscreen
digitalWrite(13, LOW);
pinMode(XM, OUTPUT);
pinMode(YP, OUTPUT);
if (p.z > minpressure && p.z < maxpressure)
{
return;
}
}
}
void screenSaver()
{
digitalWrite(13, HIGH);
TSPoint p = ts.getPoint(); ????// Read touchscreen
digitalWrite(13, LOW);
//
pinMode(XM, OUTPUT);
pinMode(YP, OUTPUT);
tft.fillScreen(BLACK);
tft.setCursor(30, 100);
tft.print(“ENTERING”);
tft.setCursor(10, 150);
tft.print(“SCREEN SAVER”);
tft.setCursor(50, 200);
tft.print(“MODE”);
delay(1000);
tft.fillScreen(RED);
int i = 0;
while (i == 0)
{
for (int i = 0; i < 150; i++)
{
int color = tft.color565(random(255), random(255), random(255));
int x = random(350);
int y = random(350);
int r = random(30);
tft.fillCircle(x, y, r, color);
TSPoint p = ts.getPoint(); ????// Read touchscreen
digitalWrite(13, LOW);
pinMode(XM, OUTPUT);
pinMode(YP, OUTPUT);
}
}
}
void setup()
{
keyarray1[0] = ”;
keyarray2[0] = ”;
Serial.begin(9600);
tft.begin(0x9341); ?// if it is not work try for 9325 ,9328,7575,8347,8357
tft.setRotation(2);
drawintro();
//tftheight = tft.height();
//tftwidth = tft.width();
draw();
tft.setCursor(10, 30);
}
void loop()
{
digitalWrite(13, HIGH);
TSPoint p = ts.getPoint(); ????// Read touchscreen
digitalWrite(13, LOW);
pinMode(XM, OUTPUT);
pinMode(YP, OUTPUT);
int ?x = map(p.x, TS_MINX, TS_MAXX, tft.width(), 0);
int y = map(p.y, TS_MINY, TS_MAXY, ?tft.height(), 0) + 30;
if ((millis() – millicount) > interval)
{
millicount = millis();
Time += 1;
}
if (Time >= screenTimout && (p.z < 5 || p.z > 1000))
{
screenSaver();
Time = 0;
}
if (p.z > 10 && p.z < 1000)
{
Time = 0;
millicount = millis();
}
if (p.z > minpressure && p.z < maxpressure)
{
tft.print(“www.RoboIndia.com”);
}
}
Customer Reviews
There are no reviews yet.