What are Power Electronics
It deals with the processing of high voltages and currents to deliver power that supports a variety of needs. Top 100 Power Electronics Projects visible us the goal that is to control the energy’s flow from source to load in the most efficient, reliable, cost-effective way possible.
Top 100 Power Electronics Projects
- A Non-Variable Dc Link Voltage Control Method for PMSM Driven by Quasi Z Source Inverter
- Dual Active Bridge Based Fully ZVS HF Isolated Inverter
- Dual Input Dual Output DC-DC Converter for Solar PV Battery Charging for EV
- 10KW Solar Powered Bidirectional EV Charger
- Machine Learning Based Circuit Breaker
- Charge Pumped Ultra Lift LUO Converter for Green Transportation
- Solar Powered BLDC Motor Drive Using Boost Converter
- Battery Cooling System for EV Applications
- Transformer less Five Level Grid Tied Inverter for Photovoltaic Applications
- Enhancement of Solar Farm Connectivity with Smart PV Inverter PV-STATCOM
- Reconfigurable Bidirectional Wireless Power Transceiver for Battery Charging
- Comparison on Luo and Ultra Luo converter for Power Factor Correction in BLDC Motor Drive
- 13 Level K Type Multi Level Inverter with DC Source using MATLAB
- Commutation Torque Ripple Reduction in BLDC Motor using Modified Septic Converter and Three Three-Level NPC Inverter
- An Efficient Single-Phase AC to AC Buck and Boost Matrix Converter
- Brushless DC Motor Drive Control using Single Input Fuzzy PI Controller (SIFPIC)
- Novel Interleaved Non-Isolated DC to DC Converter with ZVS Performance
- Three Phase Single Stage Isolated Cuka based PFC Converter
- Grid Interactive Permanent Magnet Synchronous Motor Driven Solar Water Pumping System
- Power Factor Improvement in Modified Bridgeless Landsman Converter Fed EV Battery Charger
- Speed Control of Single-Phase Induction Motor using AC Chopper| PWM
- A solar PV water pumping solution using a three-level cascaded inverter connected induction motor drive
- DC to DC Converter for Renewable Energy
- Single Stage transformer less Inverter for Photovoltaic Applications using MATLAB
- Novel Dual Input ZVS DC/DC Converter for Low Power Energy Harvesting Applications
- Quasi Cascaded H-Bridge Five-Level Boost Inverter – MATLAB
- Three-Level LLC Resonant Converter Design for EV Battery Charger
A Non-Variable Dc Link Voltage Control Method for PMSM Driven by Quasi Z Source Inverter
The variable dc-link voltage control methods can effectively improve the operation efficiency of the permanent magnet synchronous motor (PMSM) drive system. A non-variable DC link voltage control method for PMSM driven by quasi Z-source inverter are limited to the analytical calculation methods based on the system model.
Dual Active Bridge Based Fully ZVS HF Isolated Inverter
The dual active bridge based fully ZVS HF isolated inverter circuit configuration on the secondary sides of the employed three-winding transformer results in current injection into each of the switch nodes, thereby making zero-voltage-switching operation of the devices possible. This functionality while using the same number of devices as conventional two-stage and single-stage high-frequency-link.
Dual Input Dual Output DC-DC Converter for Solar PV Battery Charging for EV
Dual input dual output DC-DC converter for solar PV battery changing for EV ensures the reliable riding of a vehicle without range anxieties. Solar PV, battery and ultra-capacitor are viable sources to power the EV. The converter can be used to transfer power between the input sources and loads. The converter can be operated in ten different modes using the same structure by controlling the appropriate switches.
10KW Solar Powered Bidirectional EV Charger
The 10 KW solar powered bidirectional EV charger port is designed to be isolated and bidirectional so that both charging and vehicle-to-grid can be implemented. The converter uses a central dc link to exchange power between the EV and PV, thereby increasing efficiency. The use of silicon carbide devices and powdered alloy core inductors enables high switching frequency and power density.
Machine Learning Based Circuit Breaker
The machine learning based circuit breaker algorithm is to detect arc faults effectively. It was optimized to the characteristic signals of the arc with different loads for higher detection accuracy and robustness. In the simulative experiments for the power system the electric vehicle and the resistor will reach a high detection rate, respectively.
Charge Pumped Ultra Lift LUO Converter for Green Transportation
The charge pumped ultra-lift Luo-converter for green transportation of the new technology produces even higher voltage transfer gain. The analysis and calculation illustrated the advanced characteristics of the converter.
Solar Powered BLDC Motor Drive Using Boost Converter
It is concerned with employing a permanent magnet solar powered BLDC motor drive using boost converter from a solar photovoltaic array in which a Luo converter is used for maximum power point tracking. It has high power density, high efficiency and a simple structure rendering high output voltage with small ripples.
Battery Cooling System for EV Applications
Battery cooling system for EV applications consists of cooling channels to direct the cooling liquid flow below the battery packs. The heat absorbed by the cooling liquid is transported to the Heating-Cooling Unit. It represents an electrical heater for fast heating of the batteries under low temperature conditions.
Transformer less Five Level Grid Tied Inverter for Photovoltaic Applications
A fundamental structure of a single-phase transformer-less five level grid tied inverter for photovoltaic applications based on a switched-capacitor structure is presented. With the series-parallel switching conversion of the integrated switched-capacitor module in a packed unit, attractive features for the inverter can be obtained such as high efficiency and boosting ability within a single stage operation.
Enhancement of Solar Farm Connectivity with Smart PV Inverter PV-STATCOM
An innovative enhancement of solar farm connectivity with smart PV inverter PV-STATCOM for obviating the need for a physically connected distribution network for controlling steady-state voltage and temporary over voltages resulting from unsymmetrical faults. It increases the distributed generator hosting capacity of distribution feeders at more than an order of magnitude lower cost under similar network conditions.
Reconfigurable Bidirectional Wireless Power Transceiver for Battery Charging
To facilitate this reconfigurable bidirectional wireless power transceiver for battery charging (WPT) function with the minimum additional cost which can be reconfigured between a differential class-D power amplifier (PA) and a full-wave rectifier. It employed a maximum current charging mode to maximize the B2B charging efficiency, by charging the loading battery with rectifier and by powering with the sourcing battery.
Comparison on Luo and Ultra Luo converter for Power Factor Correction
A comparison on LUO and ultra LUO converter for Power Factor Correction is utilize to improve the power quality constraint. Bridgeless-Luo converter and Bridgeless Ultra Luo converter are two good power factor correction solutions that can be used for the application. It analyze the performance of two converters as a pre-regulator for the BLDC motor drive system. MATLAB Simulink model are utilize for the analysis.
13 Level K Type Multi Level Inverter with DC Source using MATLAB
The module of the multilevel inverter generates 13 level K-type multi level inverter with DC source using MATLAB. It involves two chargeable capacitors and 14 semiconductor switches. The capacitors are self-charging without any extra circuit and a lower number of components makes it desirable to use in a wide range of applications.
Commutation Torque Ripple Reduction using Modified Septic Converter and Three-Level NPC Inverter
A combination of a three-level multilevel inverter, a modified single-ended primary-inductor converter (SEPIC), and a dc voltage selector circuit is employed in the torque ripple suppression circuit. The experimental results show that the topology is an attractive option to reduce the commutation torque ripple reduction using modified septic converter and three level NPC inverter significantly at low- and high-speed applications.
An Efficient Single-Phase AC to AC Buck and Boost Matrix Converter
An efficient single phase ac-to-ac buck and boost matrix converter for both the magnitude and frequency of the output voltage. It reduces switching losses and thus enhances the switching converter efficiency. This reduces the complexity of the control circuit.
Brushless DC Motor Drive Control using Single Input Fuzzy PI Controller (SIFPIC)
Brushless DC (BLDC) motor is more reliable than a classic DC motor with higher efficiency. It is used conventional linear controller such as PI, PID and PD controller. Brushless DC motor drive control using single-input fuzzy PI controller (SIFPIC) is a hybrid controller that combines the advantages of the linear PI controller and fuzzy controller in one control structure.
Novel Interleaved Non-Isolated DC to DC Converter with ZVS Performance
It presents an novel interleaved non isolated dc-dc converter with ZVS performance. This gives rise to further extension of the voltage gain. Applying the interleaving technique at the input of the converter, the ripple of the input current is reduced. Due to the leakage inductances of coupled inductors, the diodes are turned-off under zero-current switching condition.
Three Phase Single Stage Isolated Cuka based PFC Converter
The three phase single stage isolated cuk based PFC converter is operate in discontinuous output inductor current mode to achieve at ac input. It avoids the inner current control loop which further eliminates the sensing of current. This makes the system more reliable and robust. A small-signal model of the converter by using the current injected equivalent circuit approach is present to aid the controller design.
Grid Interactive Permanent Magnet Synchronous Motor Driven Solar Water Pumping System
The grid interactive permanent magnet synchronous motor driven solar water pumping system enables the consumer an uninterrupted operation of the irrespective of solar insolation level. It is utilize to generate switching pulses to control the bidirectional power flow between the solar PV system and utility grid through the common dc link. A sensor is used to drive the PMSM coupled to the water pump. The boost converter is used for extracting optimum power from the solar PV array under variable insolation.
Power Factor Improvement in Modified Bridgeless Landsman Converter Fed EV Battery Charger
It deals with the design and implementation of a power factor improvement in modified bridgeless landsman converter fed EV battery charger at the front end. The PFC converter is control using a single sensed entity to achieve the robust regulation of dc-link voltage as well as to ensure the unity power factor operation.
Speed Control of Single-Phase Induction Motor using AC Chopper| PWM
It describes several PWM strategies with an AC chopper to control the speed of a single-phase induction motor. The technique has been used to operate the power electronics switches of an AC chopper. It maintains the speed control of single-phase induction motor using AC chopper at different load conditions by using the PWM technique, which reduces the harmonic contents in motor current and increasing the motor efficiency.
A solar PV water pumping solution using a three-level cascaded inverter connected induction motor drive
It presents a solar PV water pumping solution using a three level cascaded inverter connected induction motor drive. The system is operate using the control strategy which includes Maximum Power Point Tracking and Space Vector Pulse Width Modulation (SVPWM). It is used to operate the cascaded inverter and generates three-level output voltage under all environmental conditions.
DC to DC Converter for Renewable Energy
The system in which various sources of renewable energies are connect to each other in a parallel structure which use of specialize converters at the input voltages of a few tens of volts, and giving out several hundred of volts. The DC to DC converter for renewable energy with magnetic coupling will be analyze more particularly to show the technological limits.
Single Stage transformer less Inverter for Photovoltaic Applications using MATLAB
A single stage transformer less inverter for photovoltaic applications using MATLAB topologies with reduced leakage for grid tied photovoltaic (PV) applications. These topologies are mainly classified on the basis of leakage current reduction methods: galvanic isolation with common mode voltage (CMV) clamping and without CMV clamping.
Novel Dual Input ZVS DC/DC Converter for Low Power Energy Harvesting Applications
The novel dual input ZVS DC/DC converter for low power energy harvesting applications to interface with two different power simultaneously. The two boost converters are integrate with a shared diode and a filter capacitor with certain dead-bands. It operates either in discontinuous-conduction mode or in hybrid conduction mode.
Quasi Cascaded H-Bridge Five-Level Boost Inverter – MATLAB
A quasi-cascaded H-bridge five level boost inverter MATLAB has the advantages of cutting down passive components. A capacitor with a low voltage rating is added to remove an offset voltage of the output when a input voltages of two modules are unbalanced.
Three-Level LLC Resonant Converter Design for EV Battery Charger
A new three-level LLC resonant converter design for EV battery charger. The charger provides a wide range output voltage for battery system. To maintain the high efficiency under charging, it adopts a bidirectional switch. At low-output power condition, the charger uses one transformer to transfer the energy.